Should You Test the Well Before Buying a House in Minnesota?

Short answer: Yes. I wouldn't skip it. Minnesota doesn't require a water test when a home with a private well is sold, though Dakota County does, and a standard home inspection doesn't cover the well unless you add it on. The Minnesota Department of Health recommends testing for coliform bacteria and nitrate every year and for arsenic, lead and manganese at least once, so make a test part of your offer.

The quick version

  • About 1 in 5 Minnesota homes use a private well, per the Minnesota Department of Health (MDH). MDH's private wells data page puts that at about 20% of homes.

  • State law requires the seller to disclose all known wells before you sign. It does not require a water test.

  • Dakota County requires a well test before a property sale, under Ordinance 114.

  • Washington County doesn't require a test at sale, but it does require an extra written disclosure about Special Well and Boring Construction Areas (Minn. Stat. 103I.236).

  • MDH recommends testing for coliform bacteria and nitrate yearly, and for arsenic, lead and manganese at least once.

  • Use an accredited lab. Look up the well's record in the Minnesota Well Index.

Is a well test required when you buy a home in Minnesota?

Not statewide. MDH's guide for buyers and sellers says state law does not require water testing when a property is sold, but some counties do. It also notes wells usually aren't part of a home inspection.

What the state does require, under Minn. Stat. 103I.235, is disclosure. Before signing an agreement to sell, the seller must disclose in writing all wells they know of on the property, whether in use, not in use or sealed, with a map showing where they are. A well disclosure certificate is also due at closing unless the deed says the seller knows of no wells.

Which counties require a well test at sale?

Dakota County does. Dakota County's well testing page says its own discounted county test kits can't be used for property transactions. The county's Well Requirements page, which cites Ordinance 114 (Wells and Water Supply Management), lays out what a sale actually requires. The seller has to test any existing potable well and disclose the results, plus any steps needed to bring the well into conformance, before the transaction. The water analysis has to be done by an MDH certified laboratory, using approved methods, within one year before the sale. Samples for a property transaction have to be collected by an independent third party.

The required tests are coliform bacteria, nitrate, manganese (unless the well was previously tested and the results are available), and arsenic (unless the well was previously tested more than six months after it was built and the results are available). If the well is the primary water supply and it doesn't meet the drinking water standards in Section 4.04 of the ordinance, the seller has to provide a replacement potable supply. That can mean a new well, a connection to another supply, or approved treatment. If there's a treatment system, samples have to be taken from both the treated and untreated water, and the seller has to disclose that treatment is in use. Unused wells have to be permanently sealed, kept under a permit, or put back into use if that doesn't threaten the groundwater.

If you're buying in rural Dakota County, such as Eureka, Castle Rock, Greenvale or Sciota townships, ask early who is arranging the test.

Washington County does not require a well test at sale. What it does require is an extra disclosure. Under Minn. Stat. 103I.236, before you sign an agreement to sell or transfer real property in Washington County that isn't served by a municipal water system, the seller has to state in writing whether, to their knowledge, the property is located within a special well construction area designated by MDH. If the regular well disclosure says there's an unsealed well on the property, that statement is required even if the house is on city water.

MDH currently has two of these Special Well and Boring Construction Areas in the county. The Baytown/West Lakeland Township SWBCA covers parts of Baytown Township, West Lakeland Township, and the cities of Lake Elmo and Bayport, and MDH expanded it effective January 8, 2025. The Lake Elmo/Oakdale SWBCA covers parts of those two cities. Inside an SWBCA, construction, repair and sealing of regulated wells has to follow MDH's special conditions, including written plan approval before new well work. The statutory disclosure itself applies countywide, including in places like Grant, Afton, Stillwater Township, Scandia and May Township. If you're buying in Washington County, ask for that written statement, and if the property is in or near one of the mapped areas, check the MDH maps early.

For other counties around the Twin Cities, such as Anoka, Chisago, Isanti, Sherburne and Wright, we didn't find a countywide testing requirement at sale. That's a reason to ask for one in your offer, not a reason to skip it.

What should the test include?

From MDH's well testing recommendations:

Test | How often | When it’s a concern

Coliform bacteria | Every year | Any detection

Nitrate | Every year | Above 10 mg/L. Don’t boil the water; boiling concentrates nitrate.

Arsenic | At least once | Any level may be harmful; take action above 10 µg/L

Lead | At least once | Any level is harmful

Manganese | At least once | Above 100 µg/L for babies, 300 µg/L for everyone else

MDH recommends sampling from a faucet you use for cooking and drinking, and testing after any treatment system if the home has one. Use a lab accredited by MDH and contact a few labs to compare costs.

Why test if the water looks fine?

MDH says both natural sources and human activities can contaminate well water, and you can't taste, see or smell most contaminants. Testing is the only way to know. MDH links long term arsenic exposure to diabetes and several cancers, which is why it says to test for arsenic at least once. If a result is high, treatment options exist, but you want to know before closing.

How can you check the well's history?

Minnesota Well Index. MDH's online database shows records for many wells: depth, construction and sometimes geology. MDH notes there may be no record for wells built before 1974.

Seller's well disclosure. It should list every known well, including old ones. In Washington County, it should also include that SWBCA statement when the statute requires it.

Old or unused wells. MDH's buyer and seller guide says to seal any unused wells on the property. An old well near the barn is worth asking about. In Dakota County, unused wells have to be sealed, permitted or put back into use at the time of a property transaction.

How do you add a well test to an offer?

Make it a contingency with a clear deadline. Decide who samples. An independent sampler or the lab avoids questions about how the water was drawn, and in Dakota County that's required for a sale test anyway. Decide who pays. Usually the buyer, unless the county requires the seller to test. And agree on what happens if it fails. For coliform, MDH's steps are to disinfect the well and water system and test again. For nitrate, MDH says to have a licensed well contractor inspect and repair the well and consider treatment. For arsenic, MDH suggests treatment or a different water source. Get bids before you agree on a credit.

What does a well test cost?

It varies by lab and by what you test. As one public example, Dakota County sells discounted test kits for its residents at $21 per test (checked November 2026), but those kits can't be used for property transactions. Private lab prices for a buyer's panel will differ.

You can test it yourself, but most of my buyers just have it done as part of their home inspection. A lot of home inspection companies offer a well water test as an add-on, and in my experience it usually runs an extra $200 to $300 on average. It's one less thing to coordinate, and the results come back during your inspection period. In most cases, it's a no brainer to add. If there are issues, it often gives you room to negotiate a fix with the seller, and sometimes it's a big enough deal that a buyer wants to walk away, since this ties directly to health and safety.

FAQ

Does Minnesota require a well test when selling a house? No, not statewide. Dakota County requires one. The seller must still disclose all known wells. In Washington County, the seller also has to say whether the property is in a Special Well and Boring Construction Area when the statute applies.

What should I test well water for when buying a house in Minnesota? MDH recommends coliform bacteria and nitrate every year, and arsenic, lead and manganese at least once.

What is a safe nitrate level in well water? MDH flags nitrate above 10 mg/L as harmful. Don't boil the water, since boiling concentrates nitrate.

Is a well part of a home inspection? Usually not by default, per MDH. Many inspectors offer a water test as an add-on, so ask for it, and if you can, a well inspection too.

Where can I find records for a well in Minnesota? The Minnesota Well Index from MDH. Wells built before 1974 may not have a record.

Buying a home on a well?

Test the water before you own it. If you want help planning the contingencies, let's grab a coffee.

Sources

Previous
Previous

Do You Need a Survey When Buying Acreage in Minnesota?

Next
Next

Why Land and Water Are Different: Buying for This Generation and the Next